21
d
&
ri
MAY-JUNE 2014
DEMOLITION
ATTACHMENTS
The CS series shears are the ideal solution for modern industrial demolition sites – that call
for significant cutting forces, even at considerable heights – and for professionals working
in the recycling of scrap and ferrous metals. Continuous rotation, protected cylinder,
overdrive valve, interchangeable blades: all the experience and quality of an international
leader in a pure concentration of innovative and reliable technology.
Trevi Benne, the ultimate expression of power.
demolition
|
recycling
|
earthmoving
Caterpillar has introduced two new multiprocessors,
the MP218 and MP324 (pictured). Further models in
the range are planned
each serration systematically yields and tears
scrap along the blade’s cutting path. When
working with wire and cable, they trap the
material being processed along the blades as
the jaws close and this allows the blades to
progressively rip and tear the cable apart on
its way to the throat.
Caterpillar Work Tools has introduced
the two model MP300 Series multi-processor
that provides a multiplicity of choice through
the use of six jaw sets for each base housing.
The two new tools are the MP318 and MP324
that weigh in at 1,930 kg (4,246 lb) and 2,610
kg (5,742 lb) when fitted with the Concrete
Cutter jaw set and are intended for carriers
Wertheimer GmbH used a Ramtec Robi CG35R
crusher grapple during the demolition of an
old brewery in northern Germany, working
with reinforced concrete up to 40 cm (19
inches) thick, with a processing rate of 40 m3/
hr (1,400 ft3/hr). The rebar was formed in
balls by the attachment and then transported
for recycling. The physical demolition took just
two days using the CG35R, with the processing
of the structure’s foundations requiring just a
further day.
