CONEXPO GUIDE
24
ACCESS, LIFT & HANDLERS
MARCH 2014
JCB (G-1559)
plans to unveil a new compact
telehandler model at ConExpo 2014 to flesh-
out to its Hi-Viz Loadall range for construction
applications.
The 525-60 features a maximum lift
height of 20 feet and a load capacity of
5,500 pounds. The 525-60 is 5 feet, 10
inches wide and 6 feet, 3 inches tall,
allowing access to multi-story parking
and operation in tight quarters. The 525-
60 Hi-Viz replaces the 524-50, 527-55 and
the 520-50 rear-engine models, with a modern
side-engine mount design. This permits a low
boom pivot point for maximum stability and
increased visibility to the rear and across the the
unit's boom structure.
Powered by a new Tier 4 Final, 2.5-litre, JCB
Diesel by Kohler 4-cylinder engine, the 525-
60 delivers 74hp (55kW). As with other JCB
engines, there is no requirement for a diesel
particulate filter or an SCR system to meet
the Tier 4 Final emissions regulations. This
means that the JCB machine has a service-free
emissions control system, reducing operating
costs and complexity for customers.
A two-speed hydrostatic transmission offers
travel speeds of up to 16 mph. Equipped with
an 21 gpm hydraulic pump, the machine
delivers auxiliary hydraulic power for a sideshift
attachment carriage. Customers can choose
between JCB’s Q-fit carriage or a universal
skid steer compatible attachment interface for
ultimate versatility and fleet acceptance.
All boom functions are controlled by a single
servo lever joystick, with proportional control of
the two-stage boom extension allowing smooth
operation and fine control for the operator. The
machine is available with a choice of canopy
or fully glazed cab, with the option of air
conditioning.
Serviceability is much improved with the
side-mounted engine installation and, depending
on territory, the machine can be supplied with
JCB’s LiveLink telematic monitoring system
for maximum fleet visibility and maintenance
control. Options include full road light kits and
screen guards for harsh working environments.
JLG INDUSTRIES, INC. (G-1037)
will debut
the world’s largest self-propelled boom lift, the
191-foot working height 1850SJ Ultra boom.
The 1850SJ has a platform height of 185 feet
and features 80 feet of horizontal outreach.
The telescopic boom lift relies on a five-section
boom and a telescopic jib to provide operators
with unprecedented access in a variety of
applications that require high-reach versatility.
The 1850SJ features an all-new chassis,
which, with the help of hydraulics and protected
cylinders on each axle, can be extended to
provide stability on the jobsite or retracted in
one minute to narrow width for transporting on
the highway with only an over-weight permit.
When fully extended, the width of the chassis
expands from 8 feet, 2 inches to 16 feet, 6.5
inches. Three steering modes enhance the
maneuverability of this big boom, similar to the
other Ultra Booms from JLG.
JLG will also introduce the new H340AJ
hybrid boom – the industry’s first true hybrid
boom. The H340AJ hybrid boom lift combines
an environmentally friendly diesel engine with
a 48-volt electric power system. Designed
to do everything a diesel machine does, the
H340AJ meets customer demand for a lift that
uses less fuel, generates less noise (less than
69 decibels), and is environmentally friendly.
Direct AC electric drive reduces the number
of hydraulic hoses and fittings as well as the
potential for leaks. Battery-only operation allows
the H340AJ to be used indoors and in other
emissions-free areas. The H340AJ features a
platform height of 34 feet, a 17-foot up-and-
over reach, and a platform capacity of 500
pounds. With steel hoods to increase durability,
the H340AJ is ideal for general contractors,
facility managers, painters, and electrical
contractors, among others.
The company will also introduce a new
member to its LiftPod family, the FT140. It
features a platform height of 14 feet and a
working height of 20 feet, offering a solution
to ladders and scaffolding for facility, safety
JLG’s 450AJ has an
elevated platform
height of 45 feet
and platform
capacity of 500
pounds.
JCB will debut a
new telehandler
at ConExpo, the
525-60.
JLG’s G5-18A super compact telehandler
features a 127-inch turning radius.
