38
ICUEE
SHOW GUIDE
ACT
OCTOBER 2013
>40
designed to boost jobsite efficiency and
performance. The Elliott Equipment booth will
include cranes with capacities to 45 tons. Elliott
will also introduce several new models at the
show.
Some of the product updates and solutions
that will be unveiled at the ICUEE show include
a specialized configuration of Elliott’s 40-ton
40142R BoomTruck featuring reduced spread
secondary outriggers, a weight
optimized structural design for a
federal bridge legal configuration on
4 axles, and an advanced stability
profile for a 360 degree work area
without a front stabilizer. Other new
accessories to be unveiled include a new
55-foot jib for working heights over 210
feet on the 40142R, and a wide range of other
accessories and chassis configurations geared
toward the utility and construction industries.
Manitowoc
(N2021)
Manitowoc will exhibit two National Crane
products, the National Crane NBT45 boom
truck and the NBT33-TU track unit crane.
Both are mobile on and off the jobsite, travel
on highways with
little need for permitting and
require very little setup and tear down time,
Manitowoc says.
The National crane NBT45 features a 45-ton
capacity and a 161-foot, five-section boom, the
longest in its size range, the company says. The
crane is also available with boom lengths of 103
feet, 127 feet and 142 feet.
The NBT33-TU is similar to the 1400A boom
truck, but is mounted on tracks for the navigation
of rugged terrain. It features a five-section, 127-
foot boom, 33-ton capacity and Vision cab.
Also featured on the booth will be the National
Crane Truck Modification Center, which was
developed and launched last year. “This one-
stop shop for boom truck customization has
reinvented the boom truck modification process
for National Crane customers,” Manitowoc says.
Six cranes will be featured in other exhibitor
booths, including a NBT15 at the National
Commission for the Certification of Crane
Operators stand a NBT15 mounted on a F750
truck at Ford Motor Company’s booth; two
NBT40 cranes – one mounted onto a track unit,
and another mounted on a tri-drive truck – as
well as a NBT36 boom truck at Custom Truck
& Equipment’s exhibit; and a 1400H at Scott
Powerline’s stand.
standard heating and air conditioning; color
camera display for winch and rear view; three
remote control work lights; and matched size
winches with grooved drums and cable followers.
The Model 10010Mx features 50 tons of
maximum capacity, a 260 hp Cummins QSB6.7
engine, a low-unladen ground bearing pressure
of 7.4 PSI and unladen gradability of 57 percent.
The crane has 111.5 feet of full power main
boom with 50 feet of bi-fold lattice jib.
The Tadano Mantis 10010Mx also features:
Color camera display for winch and rear view;
three remote control work lights; and matched
size winches with grooved drums and cable
followers.
Scott Powerline and Utility
Equipment
(3315)
Scott Powerline and Utility Equipment
rents, sells and services a wide range
of equipment including boom trucks,
bucket trucks, cranes, crawlers with
winches, digger derricks, multi-
purpose amphibious vehicles,
pressure drills, sign trucks,
track-mounted equipment, vacuum
excavators and wire-stringing equipment for
electrical line construction and maintenance
companies, investor-owned utilities and electric
co-ops, and companies involved with bridgework,
foundation drilling, sign and lighting and general
construction.
At this year’s ICUEE, Scott Powerline will have
an indoor display booth and will also have 23
pieces of equipment displayed throughout the
three outside lots. Among these display units,
visitors will find both Elliott and National track-
mounted cranes as well as conventional boom
trucks and a 15010 Tadano Mantis teleboom
crawler crane.
KNUCKLE
BOOMS
PM North America
(L455)
PM North America will show its PM 38.5 SP
for the first time in North America. The unit
was originally launched at Bauma last Spring in
Munich. The 38.5 SP features a range from 25
to 40 tons. The PM 38.5 SP is available
from a minimum of two extensions and
a maximum of eight extensions and has
a maximum reach of 70 feet, 8 inches.
There is a choice of five different jib
configurations.
Elliott’s 45127R boom truck
Manitex International
(N2019)
Manitex International will have a number of
cranes on its stand including a brand new truck
crane – the TC700. Capacity is 70 tons at 10
feet. For more on this unit, visit the company’s
booth.
Tadano Mantis
(N2000)
Tadano Mantis will be displaying two crane
models: the 15010 and the 10010Mx. The
15010 features a 77-ton max
capacity, 260 hp Cummins QSB6.7
engine, low-unladen ground
bearing pressure of 9.1 PSI
and unladen gradability of
68 percent. The crane has
111.5 feet of full power
main boom with 50 feet
of bifold lattice jib.
The Tadano
Mantis 15010
also features:
20-degree
tilting cab
with
