60
ACCESS, LIFT&HANDLERS
JANUARY-FEBRUARY 2015
designed for smaller constructionprojectswith
limited space andwhere less payload capacity
is required. Heavier ranges are available for
transportingmaterial used on the inside and
outside of the building. TheSEPSeries has
an easy to install wall tie system. Allmodels
complywithnational regulations and standards.
GEHL
will exhibit the all-newDL12-55
telehandler, which offers 12,000pounds of
maximum capacity and55 feet of lift height –
the largest capacity and lift height of theDynalift
line. TheGehl DL12-55 comes equippedwith
a JohnDeere115hp InterimTier 4 engine,
with a4-speedpower shift transmission and
4WD/4WS. Other features include: standard
foam-filled tires, high visibility, a spacious cab
and an adjustable hydraulic system to fit the
comfort and skill level of the operator.
Gehl offers an extensive line of telescopic
handlers that range from5,500 to12,000
pounds of capacity, 19 feet, 1 inch to55, feet 5
inches in fork heights, and11 feet to41 feet, 2
inches of forward reach.
HYDROMOBILE
is again supporting the
Bricklayer 500 competition. Outside, visitors
will seeHydroMobile’sM2mast climbing
work platform.
“TheHydroMobileM2mast climbing
work platformhas evolved to be the
ultimate combination of flexible access
and sheer heavy lifting ability, and
masons have been increasingboth
productivity andprofitability through
working from theM2platform,” says
KevinO’Shea, director of safety
and trainingwith the company.
“Product refinements and
innovative design changes have
resulted in themost efficient,
themost cost-effective and
the safestmethod of working
at height formasons yet,
andHydroMobilewill be
showcasing the product by
lifting theBricklayer 500
first prize, a Ford F250
truck, high above the
competition area.
“HydroMobile places
great emphasis on the
local support provided
TheACT-8 is equippedwith an endless screw
mechanism that allows elevation at variable
speed and an exact positioning of the platform.
Assembledwith onemast, this system offers
amaximum length of 56 feet, 8 inches, a load
capacity of 8,000pounds and a lifting speed of
7 feet perminute. TheACT-8 is used for new
construction, restoration and
maintenance of buildings
and structures. It is also
an access solution for non-
building structures.
The FRSM-20Kdistinguishes
itself by its liftinghookmechanism that calls for
minimummaintenance. Assembledwith two
masts, this system offers amaximum length of
127 feet, a payload capacity of 20,000pounds
and a lifting speed of 7 feet perminute. That
configuration canbe split into two47 foot, 6
inch singlemast set-ups andbe carried on a
single drop-deck trailer. The FRSM-20K is a
tool formedium and largemasonryworks but it
is also used for infrastructure rehabprojects.
THESEPSeries are transport platforms
suitable for the transport of personnel and
material. The equipment is designedwith safety
features both in the car and at the landing
levels, and it canbe customized to easily fit
existing equipment and locations.
Load-bearing capacities and lift
speeds varywith eachmodel. The
SEPSeries include a light range
through its distribution and customer service,
quality, innovation and comprehensive industry
trainingwill combine to present an industry-
leading support package to potential customers
andnewdistributors.”
The companywill also be highlighting its new
‘on-line community’ featuring enhanced access
and assistance for customers anddistributors.
MANITOU
will exhibit the newMHT1490
heavy capacity telescopic handler, offering
20,000pounds ofmaximum capacity and46
feet ofmaximum lift height. This newmachine is
poweredby a Tier IV-certified176hpMercedes
diesel engine and features; standard stabilizers,
a3-section chainboom, and theManitou
patented JSM (switch andmove) joystick
controls.
Manitou offers an extensive full-line of
telehandlers andwill display two othermodels,
theMRT2540PrivilegePlus rotating telescopic
handler and theMLT625multi-purpose
WORLD OF CONCRETE GUIDE
Fraco’s ACT-8 features a load capacity of 8,000 pounds.
Fraco's SEP Series
of transport
platforms is
suitable for the
transport of
personnel and
material.
Gehl will exhibit its
brand newDL12-55
telehandler.
HydroMobilewill showcase itsM2mast
climbingwork platform atWorld of
Concrete.
Manitou’sMRT 2540 Privilege Plus rotating
telescopic handlerwill be on display.
PERI will have a number of products on
display atWoC.
